Profile Projector Supplier for Bangladesh
MCS Mechatronic manufactures vertical, horizontal and slant screen profile projectors in Kolhapur, India, and supplies them to machine shops, fastener and gear makers, tool rooms and inspection labs in Bangladesh. A profile projector magnifies the outline of a part onto a screen so profiles, angles, radii and threads can be measured against the drawing.
Bangladesh has one of South Asia's fastest-growing steel and construction sectors. Rebar and re-rolling mills around Chattogram and Dhaka, mega infrastructure projects and BSTI product standards all require routine material testing, and engineering universities are expanding their labs. Non-contact optical measurement makes the profile projector a fast, practical inspection tool for small precision parts.
MCS Profile Projector Range
Three screen layouts cover flat parts, shafts and threads, and operator-friendly bench inspection.
Vertical Screen Profile Projector
V30 / V36 / V40
Vertical-screen projector for flat and small parts, with a choice of worktables.
- 300 / 360 / 400 mm screens
- Tables from 170 x 170 mm to 400 x 300 mm
- X-Y traverse up to 275 x 175 mm
- 100 mm motorised vertical traverse
- Telecentric lenses 10X / 20X / 50X / 100X
Horizontal Screen Profile Projector
H30 / H36 / H40
Horizontal projector for shafts, threads and long parts, with helix tilting for thread measurement.
- 300 / 360 / 400 mm screens
- Tables from 400 x 150 mm to 600 x 150 mm
- X-Y traverse up to 300 x 100 mm
- Helix tilting ±15° for threads
- Indexable turret holding three lenses
Vertical Slant Screen Profile Projector
VSS30 / VSS36 / VSS40
Slant-screen layout for comfortable viewing during long inspection runs.
- 300 / 360 / 400 mm screens
- Tables from 170 x 170 mm to 400 x 200 mm
- X-Y traverse up to 200 x 100 mm
- Telecentric lenses 10X to 100X
- Ergonomic slanted viewing screen
Profile Projector Specifications
| Vertical models | V30 / V36 / V40 – 300 / 360 / 400 mm screens |
| Horizontal models | H30 / H36 / H40 – 300 / 360 / 400 mm screens, helix tilting ±15° |
| Slant screen models | VSS30 / VSS36 / VSS40 – 300 / 360 / 400 mm screens |
| Lenses | Telecentric 10X / 20X / 50X / 100X; indexable turret for 3 lenses |
| Worktables | 170 x 170 mm up to 600 x 150 mm depending on model |
Full data is on the profile projectors page.
Profile Projector Applications in Bangladesh
Our machines are used by steel rebar and re-rolling mills, cement and construction material producers, engineering universities, light engineering workshops and testing laboratories. Typical Bangladeshi applications include:
Machine shops
Profiles, radii, angles and chamfers on turned and milled parts
Fastener makers
Thread form, pitch and head profile checks
Gear and tool makers
Gear tooth and cutting tool profiles
Stampings and springs
Outline checks on pressed and formed parts
Plastic and rubber parts
Non-contact checks on soft or flexible parts
Inspection and training labs
Dimensional metrology teaching and QC
Testing Standards Supported
MCS profile projectors use telecentric lenses for distortion-free magnification from 10X to 100X, so profiles and dimensions can be compared directly with drawing tolerances during first-article and in-process inspection.
In Bangladesh, product conformity is overseen by BSTI (Bangladesh Standards and Testing Institution), and laboratories that issue accredited reports work under BAB (Bangladesh Accreditation Board). Measurements taken on the projector can be recorded on your inspection reports against the part drawing.
Cities We Serve in Bangladesh
We supply profile projectors to industrial cities and project sites across Bangladesh, including:
Export, Shipping & Support for Bangladesh
Export Packing & Shipping
Machines are packed in seaworthy export cases and shipped from India to Chattogram Port and Mongla Port.
Export Documents
Commercial invoice, packing list, certificate of origin and the machine's calibration certificate are supplied with every shipment.
Online Training & Support
Online operator training on the machine and its software, with remote technical support from our team in India.
Frequently Asked Questions
Do you export profile projectors to Bangladesh?
Yes. MCS Mechatronic manufactures profile projectors in Kolhapur, India, and exports them to Bangladesh through ports such as Chattogram Port and Mongla Port.
Which profile projector should I choose: vertical or horizontal?
Vertical and slant screen models suit flat and small parts placed on the table. The horizontal model suits shafts, threads and long parts, and offers helix tilting of ±15° for thread measurement.
Which magnifications are available?
Telecentric lenses of 10X, 20X, 50X and 100X are available, with an indexable turret holding three lenses.
What screen sizes do you offer?
All three series are available with 300, 360 or 400 mm screens.
Can MCS machines support testing to BSTI standards?
BSTI standards for steel and building materials follow ISO and ASTM methods. MCS profile projectors use telecentric lenses from 10X to 100X, and measurements can be recorded against drawing tolerances for your BSTI or client inspection records. We supply the technical documents your importer needs for customs clearance.
Can the machine run on the power supply used in Bangladesh?
The supply voltage depends on the model. Bangladesh's three-phase supply is 400 V at 50 Hz, so please mention your site voltage and frequency in your enquiry so we can confirm the right electrical configuration.
Get a Profile Projector Quotation for Bangladesh
Tell us the part sizes, features to measure and magnification needed, and we will recommend the right model.
Send Enquiry WhatsApp