High Temperature Tensile Tester Supplier for Egypt
MCS Mechatronic manufactures special furnaces and hot tensile testing set-ups in Kolhapur, India, and supplies them to power plant suppliers, boiler and pressure-part makers, refineries and research labs in Egypt. The furnaces test metals, composites, rubber and plastics at elevated temperature, and can be supplied with a new MCS machine or fitted to an existing UTM of any make.
Egypt has one of Africa's largest steel and construction sectors, with rebar mills, cement plants and new industrial zones around Cairo, Alexandria and the Suez Canal Economic Zone. Mega-projects, a growing automotive components base and expanding oil and gas activity all depend on materials that are tested before use. Materials for boilers, turbines and process plants must show their strength at service temperature, which is exactly what a hot tensile test measures.
MCS Hot Tensile Testing Set-up
The split furnace is an add-on attachment, so labs in Egypt can upgrade a UTM they already own.
Hot Temperature Tensile Testing Furnace
Single, two or three zone
Split-type furnace that fits new or existing UTMs and creep machines for elevated-temperature tests.
- Temperature range 300 to 1200 °C
- Split design for easy sample loading
- Single, two or three heating zones
- PID controller with thyristor-controlled heaters
- Fits any make and capacity of UTM with minor modification
Hot Tensile Testing Specifications
| Temperature range | 300 to 1200 °C |
| Furnace design | Split type, add-on and detachable |
| Heating zones | Single, two or three zones |
| Control | PID temperature controller with thyristor-controlled heaters |
| Accessories | Pull rods, grips and muffles in heat-resistant steel or titanium alloys |
| Compatibility | Screw-driven and servo-hydraulic UTMs, creep testing machines; MCS or other makes |
Full data is on the hot temperature tensile testing page.
Hot Tensile Testing Equipment
Hot Tensile Testing Applications in Egypt
Our machines are used by steel rebar mills, cement and construction material producers, automotive component makers, oil and gas suppliers, engineering universities and testing laboratories. Typical Egyptian applications include:
Power generation
Boiler tubes, steam pipe and turbine materials
Oil, gas and petrochemicals
Pressure-part and heat-exchanger steels
Steel producers
Elevated-temperature properties of creep-resisting grades
Fasteners and alloys
High-temperature bolting and alloy steels
Composites and polymers
Behaviour of plastics and composites under heat
Research institutes
Material development and qualification work
Testing Standards Supported
With 300 to 1200 °C capability and PID control, MCS furnaces are used for elevated-temperature tensile tests under methods such as ASTM E21 and ISO 6892-2.
In Egypt, product conformity is overseen by EOS (Egyptian Organization for Standardization and Quality), and laboratories that issue accredited reports work under EGAC (Egyptian Accreditation Council). Test data is recorded through the UTM's software along with the furnace temperature for your lab records.
Cities We Serve in Egypt
We supply hot temperature tensile testing machines to industrial cities and project sites across Egypt, including:
Export, Shipping & Support for Egypt
Export Packing & Shipping
Machines are packed in seaworthy export cases and shipped from India to Alexandria Port, Port Said and Sokhna Port.
Export Documents
Commercial invoice, packing list, certificate of origin and the machine's calibration certificate are supplied with every shipment.
Online Training & Support
Online operator training on the machine and its software, with remote technical support from our team in India.
Frequently Asked Questions
Do you export hot tensile testing equipment to Egypt?
Yes. MCS Mechatronic manufactures high-temperature furnaces and hot tensile testing set-ups in Kolhapur, India, and exports them to Egypt through ports such as Alexandria Port and Port Said.
Can the furnace be fitted to our existing UTM?
Yes. MCS furnaces can be fitted to any new or old universal testing machine of any make and capacity with minor modifications, and can be detached easily.
What temperature range is available?
From 300 to 1200 °C, with a choice of single, two or three heating zones and PID control.
Which grips and pull rods are used at high temperature?
Pull rods, grips and muffles are made in heat-resistant steel, titanium alloys and similar materials to suit the test temperature.
Can MCS machines support testing to Egyptian standards?
Egyptian standards issued by EOS largely follow ISO methods. MCS furnaces cover 300 to 1200 °C with PID temperature control, and test data can be recorded with your UTM software for your EOS or client records. We supply the technical documents your importer needs for registration and customs clearance.
Can the machine run on the power supply used in Egypt?
The supply voltage depends on the model. Egypt's three-phase supply is 380 V at 50 Hz, so please mention your site voltage and frequency in your enquiry so we can confirm the right electrical configuration.
Get a Hot Tensile Testing Quotation for Egypt
Tell us your existing UTM make and capacity, the test temperature and specimen size, and we will propose the right set-up.
Send Enquiry WhatsAppHot Temperature Tensile Testing Machines in Other Countries
Other Testing Machines in Egypt
- Universal Testing Machines in Egypt
- Rockwell Hardness Testers in Egypt
- Impact Testing Machines in Egypt
- Brinell Hardness Testers in Egypt
- Spring Testing Machines in Egypt
- Vickers Hardness Testers in Egypt
- Profile Projectors in Egypt
- Vickers cum Brinell Hardness Testers in Egypt
- Chain & Rope Testing Machines in Egypt
- Drop Weight Tear Testing Machines in Egypt
- Dispergraders in Egypt