Impact Testing Machine in Indonesia

Charpy & Izod Impact Tester Supplier for Indonesia

MCS Mechatronic manufactures pendulum-type Charpy and Izod impact testing machines in Kolhapur, India, and supplies them to steel plants, pipe and welding fabricators, foundries and university labs in Indonesia. The impact test shows how much energy a material absorbs before it fractures, which is a key acceptance test for steel plate, pipe, welds and castings.

Indonesia is South-East Asia's largest economy, with a steel centre in Cilegon, nickel processing in Sulawesi, a major automotive cluster around Bekasi and Karawang, and a big rubber and tyre industry. SNI marking for steel and building materials makes in-house testing a must for producers. Toughness requirements in steel, pipeline and structural specifications make an impact tester a standard item in every metallurgy lab.

25+years in testing machines

600+customers in India & abroad

ISO 9001:2015& CE certified

5 – 300 Jimpact energy range

Request a Quote for Indonesia

Charpy and Izod impact testing machine exporter to Indonesia

MCS Impact Testing Machine Range

MCS offers analog and digital pendulum impact testers for metals, plus low-energy models for plastics.

Pendulum Impact Testing Machine (MIT-30)

MIT-30 / MIT-30 (ASTM)

Analog pendulum impact tester for Charpy and Izod tests, with reading on a dial from the maximum pointer.

300 J Charpy / 168 J Izod (MIT-30)
300 J Charpy model to ASTM E23 (MIT-30 ASTM)
Pendulum on anti-friction bearings
Two strikers and combined support for Charpy and Izod
Minimum scale graduation of 2 J

View full specifications

Digital Impact Testing Machine (MIT-30 E)

MIT-30 E

Microprocessor-based impact tester with a digital display of absorbed energy and a printer interface.

300 J Charpy / 170 J Izod
Direct digital energy readout
0.5 J minimum graduation
Printer interface for test records
Quick change between Charpy and Izod strikers

View full specifications

Analog vs Digital Impact Tester

Feature	MIT-30 (Analog)	MIT-30 E (Digital)
Capacity	300 J Charpy / 168 J Izod	300 J Charpy / 170 J Izod
Reading	Dial with maximum pointer	Digital display
Minimum graduation	2 J	0.5 J
Records	Manual	Printer interface

Impact Testing Machine Specifications

Models	MIT-30, MIT-30 E, MIT-30 (ASTM), MIT-1.5, MIT-0.5
Capacity	300 J / 168 J (MIT-30); 300 J / 170 J (MIT-30 E); 300 J (ASTM); 15 J; 5 J
Minimum graduation	2 J, 0.5 J, 2 J, 0.1 J, 0.05 J respectively
Test types	Charpy and Izod (MIT-30 / 30 E); Charpy only (MIT-30 ASTM)
Standards	BS 131 Part IV; ASTM E23 for the MIT-30 (ASTM) model
Low-energy models	MIT-1.5 (15 J) and MIT-0.5 (5 J) for plastics and light materials

Full model data is on the impact testing machines page.

Impact Tester Models & Details

MCS Impact Testing Machine for Indonesia — MCS Impact Testing Machine

Impact Tester Applications in Indonesia

Our machines are used by steel and nickel producers, automotive component makers, rubber and tyre factories, power plants, construction material labs and universities. Typical Indonesian applications include:

Steel plate and structural steel

Charpy V-notch toughness for mill certificates

Pipe and pipeline welding

Weld and heat-affected zone toughness in procedure qualification

Foundries and forgings

Toughness checks on castings and forged parts

Pressure vessel fabrication

Impact tests required by vessel and boiler codes

Plastics and polymers

Low-energy Izod and Charpy tests with the 5 J and 15 J models

Universities and colleges

Strength of materials laboratories

Testing Standards Supported

MCS pendulum impact testers conform to BS 131 Part IV, and the MIT-30 (ASTM) model is built for Charpy tests to ASTM E23, the method used in most steel, pipe and welding specifications.

In Indonesia, product conformity is overseen by BSN (National Standardization Agency), which issues SNI standards, and laboratories that issue accredited reports work under KAN (National Accreditation Committee). The digital MIT-30 E gives a direct energy reading with a printer interface, so every result can be recorded for your lab files and customer certificates.

Cities We Serve in Indonesia

We supply impact testing machines to industrial cities and project sites across Indonesia, including:

Jakarta Surabaya Bekasi Cikarang Karawang Cilegon Batam Semarang Medan Morowali

Export, Shipping & Support for Indonesia

Export Packing & Shipping

Machines are packed in seaworthy export cases and shipped from India to Tanjung Priok Port, Jakarta, Tanjung Perak Port, Surabaya and Belawan Port, Medan.

Export Documents

Commercial invoice, packing list, certificate of origin and the machine's calibration certificate are supplied with every shipment.

Online Training & Support

Online operator training on the machine and its software, with remote technical support from our team in India.

Frequently Asked Questions

Do you export impact testing machines to Indonesia?

Yes. MCS Mechatronic manufactures Charpy and Izod impact testing machines in Kolhapur, India, and exports them to Indonesia through ports such as Tanjung Priok Port, Jakarta and Tanjung Perak Port, Surabaya.

Can one machine perform both Charpy and Izod tests?

Yes. The MIT-30 and MIT-30 E come with two strikers and a combined support, and changing from Charpy to Izod only needs the striker to be swapped. The MIT-30 (ASTM) model is dedicated to Charpy tests.

Which impact tester suits ASTM E23 Charpy testing?

The MIT-30 (ASTM) 300 J model is built for Charpy tests to ASTM E23 and is checked geometrically at our works.

Do you have impact testers for plastics?

Yes. The MIT-1.5 (15 J) and MIT-0.5 (5 J) low-energy models suit plastics and other light materials.

Can MCS machines support SNI testing in Indonesia?

SNI standards for steel and building materials reference ISO and ASTM test methods. MCS impact testers conform to BS 131 Part IV, and the MIT-30 (ASTM) model to ASTM E23, and the digital model's printed results can be filed for your SNI or client records. We supply the documents your importer needs for customs clearance.

Can the machine run on the power supply used in Indonesia?

The supply voltage depends on the model. Indonesia's three-phase supply is 380 V at 50 Hz, so please mention your site voltage and frequency in your enquiry so we can confirm the right electrical configuration.

Get an Impact Tester Quotation for Indonesia

Tell us the materials, test type (Charpy or Izod) and standard you follow, and we will recommend the right model.

Send Enquiry WhatsApp

Impact Testing Machines in Indonesia