Computerized Brinell Hardness Tester Supplier for Indonesia
MCS Mechatronic manufactures computerized and fully automatic Brinell hardness testers in Kolhapur, India, and exports them to foundries, forging shops, steel plants and casting buyers in Indonesia. A CCD camera captures each indentation and the software measures its diameter, so the Brinell number is calculated without manual microscope readings.
Indonesia is South-East Asia's largest economy, with a steel centre in Cilegon, nickel processing in Sulawesi, a major automotive cluster around Bekasi and Karawang, and a big rubber and tyre industry. SNI marking for steel and building materials makes in-house testing a must for producers. Brinell testing is the standard hardness check for castings, forgings and coarse-grained metals, where a large indentation gives a representative result.
MCS Brinell Hardness Tester Range
Choose a fully automatic model for production lines or a manual / hydraulic model for lower volumes.
Computerized Fully Automatic Brinell Hardness Tester
B3000(0)-PC / TS / TSA
One-button auto cycle: the job is clamped, loaded, and the indentation is imaged and measured automatically on a PC or touch screen.
- Load range 250 to 3000 kgf in steps of 250 kgf
- CCD camera with image-processing measurement
- PC or touch screen versions
- High accuracy and repeatability at all loads
- Built for production testing
Manual / Hydraulic Brinell Hardness Tester
Analogue and hydraulic models
Robust hydraulic Brinell tester for workshops and foundries that test fewer parts per shift.
- Hydraulic loading system
- Suits castings and forgings
- Simple operation for shop-floor use
- Economical entry into Brinell testing
Automatic vs Manual Brinell Tester
| Feature | Fully Automatic | Manual / Hydraulic |
|---|---|---|
| Measurement | CCD camera, automatic diameter measurement | Manual indentation measurement |
| Cycle | Automatic clamp, load, dwell, measure | Operator controlled |
| Typical fit | Foundry and forging production lines | Workshops and lower volumes |
Brinell Hardness Tester Specifications
| Load range | 250 to 3000 kgf in steps of 250 kgf |
| Measurement | CCD camera with image-processing software on PC or touch screen |
| Operation | Fully automatic cycle with preset dwell timer (automatic models) |
| Standards | Conforms to IS:2281, BS EN 10003-2 and ASTM E10 |
Full model data is on the Brinell hardness tester page.
Brinell Hardness Tester Models
Brinell Tester Applications in Indonesia
Our machines are used by steel and nickel producers, automotive component makers, rubber and tyre factories, power plants, construction material labs and universities. Typical Indonesian applications include:
Foundries
Hardness of grey iron, SG iron and steel castings
Forging shops
Hardness of forged and heat-treated parts
Steel plants
Hardness of billets, bars and plates
Aluminium and non-ferrous
Brinell checks on extrusions and alloy castings
Automotive suppliers
Hardness of brake drums, hubs and housings
Inspection agencies
Third-party hardness verification for buyers
Testing Standards Supported
MCS Brinell hardness testers conform to IS:2281, BS EN 10003-2 and ASTM E10, the Brinell methods specified for most castings and forgings.
In Indonesia, product conformity is overseen by BSN (National Standardization Agency), which issues SNI standards, and laboratories that issue accredited reports work under KAN (National Accreditation Committee). Measured results are stored by the software and can be printed or saved for your lab records and customer reports.
Cities We Serve in Indonesia
We supply brinell hardness testers to industrial cities and project sites across Indonesia, including:
Export, Shipping & Support for Indonesia
Export Packing & Shipping
Machines are packed in seaworthy export cases and shipped from India to Tanjung Priok Port, Jakarta, Tanjung Perak Port, Surabaya and Belawan Port, Medan.
Export Documents
Commercial invoice, packing list, certificate of origin and the machine's calibration certificate are supplied with every shipment.
Online Training & Support
Online operator training on the machine and its software, with remote technical support from our team in India.
Frequently Asked Questions
Do you export Brinell hardness testers to Indonesia?
Yes. MCS Mechatronic manufactures computerized and automatic Brinell hardness testers in Kolhapur, India, and exports them to Indonesia via ports such as Tanjung Priok Port, Jakarta and Tanjung Perak Port, Surabaya.
How does the automatic Brinell tester measure the indentation?
After the preset dwell, a CCD camera fitted on the machine captures the indentation and the software measures its diameter and displays the Brinell hardness number on the PC or touch screen.
What load range is available?
The computerized models apply 250 to 3000 kgf in steps of 250 kgf, covering standard Brinell tests on steel, cast iron and non-ferrous metals.
Is the automatic model suitable for foundry production?
Yes. The operator places the job and presses Cycle Start; clamping, loading, measurement and lowering run automatically, which suits high-volume foundry and forging testing.
Can MCS machines support SNI testing in Indonesia?
SNI standards for steel and building materials reference ISO and ASTM test methods. MCS Brinell testers conform to IS:2281, BS EN 10003-2 and ASTM E10, and the image-measured results can be saved for your SNI or client records. We supply the documents your importer needs for customs clearance.
Can the machine run on the power supply used in Indonesia?
The supply voltage depends on the model. Indonesia's three-phase supply is 380 V at 50 Hz, so please mention your site voltage and frequency in your enquiry so we can confirm the right electrical configuration.
Get a Brinell Tester Quotation for Indonesia
Tell us the parts, sizes and daily test volume, and we will recommend the right Brinell model.
Send Enquiry WhatsAppBrinell Hardness Testers in Other Countries
Other Testing Machines in Indonesia
- Universal Testing Machines in Indonesia
- Rockwell Hardness Testers in Indonesia
- Impact Testing Machines in Indonesia
- Spring Testing Machines in Indonesia
- Vickers Hardness Testers in Indonesia
- Profile Projectors in Indonesia
- Vickers cum Brinell Hardness Testers in Indonesia
- Hot Temperature Tensile Testing Machines in Indonesia
- Chain & Rope Testing Machines in Indonesia
- Drop Weight Tear Testing Machines in Indonesia
- Creep & Stress Relaxation Testing Machines in Indonesia
- Dispergraders in Indonesia