Rockwell Hardness Tester in Indonesia

Digital & Touch Screen Rockwell Tester Supplier for Indonesia

MCS Mechatronic builds digital and touch screen Rockwell hardness testers in Kolhapur, India, and supplies them to heat-treatment shops, forging and casting units, fastener makers and quality labs across Indonesia. Motorised loading, automatic dwell and a digital readout give fast, operator-independent HRC, HRB and superficial readings on the shop floor.

Indonesia is South-East Asia's largest economy, with a steel centre in Cilegon, nickel processing in Sulawesi, a major automotive cluster around Bekasi and Karawang, and a big rubber and tyre industry. SNI marking for steel and building materials makes in-house testing a must for producers. Rockwell testing is the quickest check on heat-treated and finished steel parts, which makes it the first hardness tester most plants buy.

25+years in testing machines

600+customers in India & abroad

ISO 9001:2015& CE certified

60 / 100 / 150 kgfRockwell test forces

Request a Quote for Indonesia

Rockwell hardness tester exporter to Indonesia

MCS Rockwell Hardness Tester Range

Choose between the touch screen model for production lines and the digital model for workshops and labs. Both cover regular and superficial Rockwell scales.

Touch Screen Rockwell Hardness Tester (RHT-TS)

Model RHT-TS

Fully automatic, motorised Rockwell tester with an industrial touch screen, built for production testing.

Motorised loading and unloading cycle
Industrial touch screen with on-screen results
Batch file processing with statistical analysis
Results exported to PDF; USB / Wi-Fi printer port
High accuracy and repeatability at all loads

View full specifications

Digital Rockwell Hardness Tester

Digital / HMI models

Digital Rockwell and Rockwell superficial testers with a direct digital readout of hardness.

Rockwell scales A to V and superficial N, T, W, X, Y scales
Preliminary force 10 kgf; total forces 60, 100 and 150 kgf
Depth resolution of 0.1 Rockwell unit
230 mm maximum test height, 133 mm throat
Optional Jominy end-quench fixture and V-anvil

View full specifications

Touch Screen vs Digital Rockwell

Feature	Touch Screen (RHT-TS)	Digital Rockwell
Operation	Fully automatic, motorised	Motorised load and dwell, digital readout
Display	Industrial touch screen	Digital display
Data handling	Batch statistics, PDF export, printer port	Direct hardness reading
Typical fit	Production lines, high-volume QC	Workshops, tool rooms, college labs

Rockwell Hardness Tester Specifications

Rockwell scales	A, B, C, D, E, F, G, H, K, L, M, P, R, S, V
Superficial scales	15/30/45 N, T, W, X and Y
Test forces	Preliminary 10 kgf; total 60, 100, 150 kgf
Resolution	0.1 Rockwell unit (depth)
Max. test height / throat	230 mm / 133 mm
Standards	IS:3804, BS 10109-2 and ASTM E18 (Rockwell); IS:5073, BS 10189-2 and ASTM E18 (superficial)
Optional accessories	Steel ball indenters 1/8", 1/4", 1/2"; test blocks; 200 mm and V-groove tables; Jominy fixture

Full model data is on the Rockwell hardness tester page.

Rockwell Hardness Tester Models

Digital Rockwell Tester for Indonesia — Digital Rockwell Tester

Motorised Rockwell Hardness Tester for Indonesia — Motorised Rockwell Hardness Tester

Rockwell Hardness Testing System for Indonesia — Rockwell Hardness Testing System

Rockwell cum Rockwell Superficial Hardness Tester for Indonesia — Rockwell cum Rockwell Superficial Hardness Tester

Rockwell Tester Applications in Indonesia

Our machines are used by steel and nickel producers, automotive component makers, rubber and tyre factories, power plants, construction material labs and universities. Typical Indonesian applications include:

Heat treatment shops

HRC checks after hardening, tempering and case hardening

Forgings and castings

Incoming and final hardness checks on forged and cast parts

Fasteners and springs

Hardness verification of bolts, nuts, pins and spring steel

Automotive components

Gears, shafts and bearings on the production line

Sheet metal and non-ferrous

Superficial scales for thin sheet, coatings and soft metals

Training and research labs

Engineering college and polytechnic material labs

Testing Standards Supported

MCS Rockwell hardness testers conform to IS:3804, BS 10109-2 and ASTM E18, and the superficial models to IS:5073, BS 10189-2 and ASTM E18. These cover the test methods most steel and component buyers specify.

In Indonesia, product conformity is overseen by BSN (National Standardization Agency), which issues SNI standards, and laboratories that issue accredited reports work under KAN (National Accreditation Committee). Touch screen models store batch results with statistics and export them to PDF for your lab records and customer certificates.

Cities We Serve in Indonesia

We supply rockwell hardness testers to industrial cities and project sites across Indonesia, including:

Jakarta Surabaya Bekasi Cikarang Karawang Cilegon Batam Semarang Medan Morowali

Export, Shipping & Support for Indonesia

Export Packing & Shipping

Machines are packed in seaworthy export cases and shipped from India to Tanjung Priok Port, Jakarta, Tanjung Perak Port, Surabaya and Belawan Port, Medan.

Export Documents

Commercial invoice, packing list, certificate of origin and the machine's calibration certificate are supplied with every shipment.

Online Training & Support

Online operator training on the machine and its software, with remote technical support from our team in India.

Frequently Asked Questions

Do you export Rockwell hardness testers to Indonesia?

Yes. MCS Mechatronic manufactures digital and touch screen Rockwell hardness testers in Kolhapur, India, and exports them to Indonesia, shipping to ports such as Tanjung Priok Port, Jakarta and Tanjung Perak Port, Surabaya.

Which Rockwell scales can the MCS tester measure?

Regular Rockwell scales A to V with 60, 100 and 150 kgf total forces, and superficial N, T, W, X and Y scales with 15, 30 and 45 kgf, using diamond and steel ball indenters.

Should I choose the touch screen or the digital Rockwell tester?

The touch screen RHT-TS is fully automatic and stores batch statistics, which suits production testing. The digital model is a simpler, economical choice for workshops, tool rooms and teaching labs.

Can it test round parts and do Jominy tests?

Yes. A V-groove table for round jobs and a Jominy end-quench test fixture are available as optional accessories.

Can MCS machines support SNI testing in Indonesia?

SNI standards for steel and building materials reference ISO and ASTM test methods. MCS Rockwell testers conform to IS:3804, BS 10109-2 and ASTM E18, and results can be exported to PDF with batch statistics for your SNI or client records. We supply the documents your importer needs for customs clearance.

Can the machine run on the power supply used in Indonesia?

The supply voltage depends on the model. Indonesia's three-phase supply is 380 V at 50 Hz, so please mention your site voltage and frequency in your enquiry so we can confirm the right electrical configuration.

Get a Rockwell Tester Quotation for Indonesia

Tell us the parts you test, the scales you need and your daily test volume, and we will recommend the right model.

Send Enquiry WhatsApp

Rockwell Hardness Testers in Indonesia