Universal Testing Machine in Indonesia

Computerized & Servo Control UTM Supplier for Indonesia

MCS Mechatronic manufactures computerized and servo control universal testing machines in Kolhapur, India, and exports them to steel mills, pipe plants, construction laboratories and universities across Indonesia. One machine handles tensile, compression, bend, shear and transverse tests on metals, rebar, wire, polymers and building materials, from 100 kN up to 2000 kN.

Indonesia is South-East Asia's largest economy, with a steel centre in Cilegon, nickel processing in Sulawesi, a major automotive cluster around Bekasi and Karawang, and a big rubber and tyre industry. SNI marking for steel and building materials makes in-house testing a must for producers. A reliable UTM sits at the centre of that testing, and both of our UTM ranges are built to give repeatable results under daily production loads.

25+years in testing machines

600+customers in India & abroad

ISO 9001:2015& CE certified

100–2000 kNcapacity range

Request a Quote for Indonesia

Universal testing machine (UTM) exporter to Indonesia

Choose Your UTM: Computerized or Servo Control

Buyers in Indonesia usually choose between two MCS models. Both share the same controller, software and capacity range; the difference lies in how load and strain rate are controlled and how specimens are gripped.

Computerized Universal Testing Machine (UTE)

MCS-UTE series

The workhorse hydraulic UTM for tensile, compression, bend and transverse tests, driven by the MCS-MC01 controller and Unitest-Plus software.

Six capacities from 100 kN to 2000 kN (UTE-10 to UTE-200)
Load accuracy of ±1% across the rated range
Piston displacement resolution of 0.1 mm
Manual as well as computerized control from the same machine
Optional split furnace for tests up to 1200 °C

View full specifications

Computerized Servo Control Universal Testing Machine (UTE-S)

MCS-UTE-S / FLG series

Closed-loop servo control of load and strain rate with a front-loading crosshead and hydraulic grips, built for high-volume and rate-critical testing.

Seven capacities from 100 kN to 2000 kN
Front-loading crosshead for quick grip and specimen changes
Hydraulic gripping with an in-built power pack
Piston displacement resolution of 0.01 mm
Servo-valve control of load rate and strain rate

View full specifications

Side-by-Side Comparison

Feature	Computerized UTM (UTE)	Servo Control UTM (UTE-S)
Control	Computerized, with manual operation	Computerized closed-loop servo control
Capacity range	100 – 2000 kN	100 – 2000 kN
Displacement resolution	0.1 mm	0.01 mm
Specimen gripping	Wedge grips in the crosshead	Hydraulic grips, front-loading crosshead
Typical fit	QC labs, colleges, general workshops	Steel mills, pipe plants, accredited labs

Universal Testing Machine Specifications

Capacities	100, 200, 400, 600, 1000, 1500* and 2000 kN (*UTE-S range)
Load accuracy	±1% (from 2% of rated capacity)
Controller	MCS-MC01, 24-bit ADC with 1/100000 counts, closed-loop PID
Software	Unitest-Plus: tensile, compression, cyclic, spring, bend and flexural tests, PDF and Excel export
Extensometer	Electronic extensometer MCE-2, accuracy class 0.2, 25 / 50 mm gauge length
High-temperature option	SS304 split furnace, single or three zone, 150 – 1200 °C
Standards	Conforms to IS:1828 and ASTM E8
Power supply	400 – 440 V, 3 phase (1.0 – 4.9 kW depending on model)

Detailed model-wise data (clearances, ram stroke, straining speed, dimensions and weight) is available on the computerized UTM and servo control UTM pages.

UTM Controller, Extensometer & Accessories

MCS-MC01 UTM Controller for Indonesia — MCS-MC01 UTM Controller

Electronic Extensometer MCE-2 for Indonesia — Electronic Extensometer MCE-2

Tensile Test with Extensometer MCE-2 for Indonesia — Tensile Test with Extensometer MCE-2

High-Temperature Split Furnace for UTM for Indonesia — High-Temperature Split Furnace for UTM

UTM Wedge Grips for Indonesia — UTM Wedge Grips

Servo-Controlled Front Open Hydraulic UTM for Indonesia — Servo-Controlled Front Open Hydraulic UTM

UTM Applications in Indonesia

Our machines are used by steel and nickel producers, automotive component makers, rubber and tyre factories, power plants, construction material labs and universities. Typical Indonesian applications include:

Steel rebar and TMT bars

Yield strength, tensile strength, elongation and bend/re-bend checks on reinforcement bars

Line pipe and structural steel

Tensile coupons from plates, pipe and welded joints for mill and project QC

Wire, cable and conductors

Breaking load and elongation of wires, strands and conductors

Fasteners and forgings

Proof load and tensile tests on bolts, studs and forged parts

Concrete, cement and construction

Compression and flexural tests for site and third-party laboratories

Universities and research labs

Teaching and research on metals, polymers and composites

Testing Standards Supported

MCS universal testing machines conform to IS:1828 and ASTM E8, and are used for tests carried out under methods such as ISO 6892-1 (metallic tensile testing), ASTM A370 (steel products) and the rebar tensile and bend clauses of ASTM A615 / BS 4449.

In Indonesia, product conformity is overseen by BSN (National Standardization Agency), which issues SNI standards, and laboratories that issue accredited reports work under KAN (National Accreditation Committee). Unitest-Plus reports carry load, displacement and extension data with stress-strain curves, and can be exported to PDF or Excel for your lab records and client submissions.

Cities We Serve in Indonesia

We supply universal testing machines to industrial cities and project sites across Indonesia, including:

Jakarta Surabaya Bekasi Cikarang Karawang Cilegon Batam Semarang Medan Morowali

Export, Shipping & Support for Indonesia

Export Packing & Shipping

Machines are packed in seaworthy export cases and shipped from India to Tanjung Priok Port, Jakarta, Tanjung Perak Port, Surabaya and Belawan Port, Medan.

Export Documents

Commercial invoice, packing list, certificate of origin and the machine's calibration certificate are supplied with every shipment.

Online Training & Support

Online operator training on the machine and Unitest-Plus software, with remote technical support from our team in India.

Frequently Asked Questions

Do you export universal testing machines to Indonesia?

Yes. MCS Mechatronic manufactures computerized and servo control universal testing machines in Kolhapur, India, and exports them to customers in Indonesia. Machines are shipped in export packing to ports such as Tanjung Priok Port, Jakarta and Tanjung Perak Port, Surabaya.

What is the difference between the computerized UTM and the servo control UTM?

Both cover 100 to 2000 kN and run on the MCS-MC01 controller with Unitest-Plus software. The servo control model adds closed-loop servo-valve control of load and strain rate, hydraulic grips with a front-loading crosshead, and a finer 0.01 mm displacement resolution, which suits high-volume and rate-critical testing.

Which UTM capacity should I choose for rebar testing in Indonesia?

Capacity depends on the largest bar diameter and grade you test. As a guide, 600 kN suits bars up to about 25 to 28 mm, and 1000 kN or 2000 kN covers 32 to 40 mm bars and higher grades. Share your bar sizes and grades and we will recommend a model.

Which standards do MCS universal testing machines meet?

MCS UTMs conform to IS:1828 and ASTM E8, and are used for tensile, compression and bend tests under methods such as ISO 6892-1, ASTM A370 and the rebar clauses of ASTM A615 and BS 4449.

Can MCS machines support SNI testing in Indonesia?

SNI standards for steel and building materials reference ISO and ASTM test methods. MCS machines conform to IS:1828 and ASTM E8, and the test reports from Unitest-Plus can be laid out to suit your SNI or client specification. We supply the documents your importer needs for customs clearance.

Can the machine run on the power supply used in Indonesia?

Standard models run on 400 to 440 V three-phase power. Indonesia's three-phase supply is 380 V at 50 Hz, so please mention your site voltage and frequency in your enquiry and the motor and drive will be matched to it.

Get a UTM Quotation for Indonesia

Tell us the material, specimen sizes, maximum load and test standard, and we will recommend the right model with a delivered price.

Send Enquiry WhatsApp

Universal Testing Machines (UTM) in Indonesia