Computerized Vickers Hardness Tester Supplier for Indonesia
MCS Mechatronic manufactures touch screen Vickers hardness testers in Kolhapur, India, and supplies them to precision engineering, heat treatment, automotive and research labs in Indonesia. The indentation is imaged and its diagonals are measured automatically by software, giving accurate Vickers numbers on everything from soft metals to hardened parts.
Indonesia is South-East Asia's largest economy, with a steel centre in Cilegon, nickel processing in Sulawesi, a major automotive cluster around Bekasi and Karawang, and a big rubber and tyre industry. SNI marking for steel and building materials makes in-house testing a must for producers. Vickers testing leaves a very small indentation, so it can be used on finished components, thin sheet and case-hardened layers.
MCS Vickers Hardness Tester
The MVM 50-TS combines motorised loading with automatic image measurement on an industrial touch screen.
Touch Screen Vickers Hardness Tester (MVM 50-TS)
MVM 50-TS
Fully touch screen Vickers tester with image-processing measurement, statistics and PDF export.
- Test loads of 5, 10, 20, 30 and 50 kgf
- Automatic diagonal measurement by image processing
- Motorised loading and unloading cycle
- Statistics: mean, median, standard deviation, histogram
- PDF export; USB / Wi-Fi printer port
Vickers Hardness Tester Specifications
| Test loads | 5, 10, 20, 30, 50 kgf |
| Maximum test height | 200 mm |
| Measurement | Image processing on industrial touch screen |
| Data | Batch file storage, statistical evaluation, PDF export |
| Machine size / weight | L600 x W440 x H920 mm, approx. 100 kg |
| Power supply | 220 V AC, 50 Hz, single phase |
| Standard | Conforms to IS 1501-2:2013 |
Full data is on the Vickers hardness tester page.
Vickers Hardness Testing
Vickers Tester Applications in Indonesia
Our machines are used by steel and nickel producers, automotive component makers, rubber and tyre factories, power plants, construction material labs and universities. Typical Indonesian applications include:
Precision components
Hardness of finished parts with a near non-destructive indentation
Heat treatment and case depth
Hardness traverses through carburised and nitrided layers
Thin sheet and strip
Small loads for thin and coated material
Welding procedure tests
Hardness surveys across weld, HAZ and parent metal
Tool and die makers
Hardness of tool steels and dies
Research and universities
Metallurgy and materials research
Testing Standards Supported
MCS Vickers hardness testers conform to IS 1501-2:2013, and with loads from 5 to 50 kgf they cover the macro-Vickers range used in weld procedure and heat-treatment testing.
In Indonesia, product conformity is overseen by BSN (National Standardization Agency), which issues SNI standards, and laboratories that issue accredited reports work under KAN (National Accreditation Committee). Results are stored in batch files with statistics and exported to PDF for your lab records and customer reports.
Cities We Serve in Indonesia
We supply vickers hardness testers to industrial cities and project sites across Indonesia, including:
Export, Shipping & Support for Indonesia
Export Packing & Shipping
Machines are packed in seaworthy export cases and shipped from India to Tanjung Priok Port, Jakarta, Tanjung Perak Port, Surabaya and Belawan Port, Medan.
Export Documents
Commercial invoice, packing list, certificate of origin and the machine's calibration certificate are supplied with every shipment.
Online Training & Support
Online operator training on the machine and its software, with remote technical support from our team in India.
Frequently Asked Questions
Do you export Vickers hardness testers to Indonesia?
Yes. MCS Mechatronic manufactures touch screen Vickers hardness testers in Kolhapur, India, and exports them to Indonesia via ports such as Tanjung Priok Port, Jakarta and Tanjung Perak Port, Surabaya.
Which test loads does the MCS Vickers tester offer?
The MVM 50-TS applies 5, 10, 20, 30 and 50 kgf, which suits thin sheet as well as hardened steel components.
Is the indentation measured automatically?
Yes. The indentation image is captured and the diagonals are measured by image-processing software on the touch screen, which removes operator reading errors.
Can Vickers testing be used on finished parts?
Yes. The small indentation makes Vickers testing practically non-destructive, so it is widely used on finished precision components.
Can MCS machines support SNI testing in Indonesia?
SNI standards for steel and building materials reference ISO and ASTM test methods. MCS Vickers testers conform to IS 1501-2:2013, and results can be exported to PDF with statistics for your SNI or client records. We supply the documents your importer needs for customs clearance.
Can the machine run on the power supply used in Indonesia?
The MVM 50-TS runs on 220 V AC, 50 Hz, single phase. Indonesia's three-phase supply is 380 V at 50 Hz, so please mention your site voltage and frequency in your enquiry so we can confirm the right electrical configuration.
Get a Vickers Tester Quotation for Indonesia
Tell us the parts, hardness range and test loads you need, and we will send a quotation.
Send Enquiry WhatsAppOther Testing Machines in Indonesia
- Universal Testing Machines in Indonesia
- Rockwell Hardness Testers in Indonesia
- Impact Testing Machines in Indonesia
- Brinell Hardness Testers in Indonesia
- Spring Testing Machines in Indonesia
- Profile Projectors in Indonesia
- Vickers cum Brinell Hardness Testers in Indonesia
- Hot Temperature Tensile Testing Machines in Indonesia
- Chain & Rope Testing Machines in Indonesia
- Drop Weight Tear Testing Machines in Indonesia
- Creep & Stress Relaxation Testing Machines in Indonesia
- Dispergraders in Indonesia